China Good quality 100W Silent Portable Oil Free Air Compressor for 1liter Oxygen Concentrator air compressor oil

Product Description

Product Parameter

ITEM NO

GLE80A

Name

Air compressor

Packing

5 pcs / carton case
200 pcs / pallet

Weight

2.25 kg

Dimension

150*95*135 mm

Installation size 

73*97(4*φ9.2) mm

 

 

 

Technical Specification

Voltage : AC220V 50Hz / 110V 60Hz
Power: <=100W;
Restart pressure : 0 bar ;
capacitor : 3uF ;
Speed: 1440rpm / 1700rpm ;
Noise : ≤48dB(A) ;
Temperature : -5ºC-40ºC ;
Thermal protector : 135ºC ±5 ;
Insulation class: B

After-sales Service: on Line Support and Free Spare Parts
Warranty: Two Years
Lubrication Style: Oil-free
Cooling System: Air Cooling
Cylinder Arrangement: Duplex Arrangement
Rate Working Pressure: 1.4 Bar
Samples:
US$ 29/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

Can Oil-Free Air Compressors Handle High-Pressure Applications?

Yes, oil-free air compressors are capable of handling high-pressure applications, but certain considerations need to be taken into account. Here’s a detailed explanation of the capabilities and considerations regarding the use of oil-free air compressors in high-pressure applications:

1. Compressor Design:

Oil-free air compressors are designed to deliver oil-free compressed air, and some models are specifically engineered to handle high-pressure requirements. These compressors incorporate robust components, such as high-strength materials, reinforced valves, and advanced sealing technologies, to withstand the higher pressures generated during compression. They are typically designed to operate within specific pressure ranges, and their performance and reliability are optimized for those ranges.

2. Pressure Rating:

When selecting an oil-free air compressor for a high-pressure application, it is crucial to consider the compressor’s pressure rating. The pressure rating indicates the maximum pressure that the compressor can reliably generate and maintain. Oil-free compressors suitable for high-pressure applications are available with varying pressure ratings, ranging from several hundred PSI (pounds per square inch) to several thousand PSI, depending on the specific model and manufacturer. It’s important to choose a compressor with a pressure rating that meets or exceeds the requirements of the intended application.

3. Operating Efficiency:

Operating efficiency is an important consideration when using oil-free air compressors for high-pressure applications. As the pressure requirement increases, the compressor may consume more energy to achieve and maintain the desired pressure. It’s advisable to select a compressor that is optimized for energy efficiency, as it can help reduce operating costs and minimize environmental impact. Compressors equipped with advanced control systems, variable speed drives, and efficient motor designs can enhance overall energy efficiency in high-pressure applications.

4. Air Treatment and Filtration:

High-pressure applications often require dry and clean compressed air. In addition to the oil-free operation, it is important to ensure that the compressed air is adequately treated and filtered to remove moisture, particulates, and other contaminants. The use of appropriate air dryers, filters, and separators in the compressed air system is necessary to maintain the desired air quality and protect downstream equipment in high-pressure applications.

5. System Safety and Regulations:

High-pressure applications present additional safety considerations. It is essential to ensure that the entire compressed air system, including the compressor, storage tanks, piping, and safety devices, is designed, installed, and operated in compliance with relevant safety regulations and standards. Pressure relief valves, pressure gauges, and other safety devices should be appropriately sized and configured to handle the high-pressure conditions. Regular inspections, maintenance, and adherence to safety protocols are crucial to ensure the safe operation of the high-pressure oil-free air compressor system.

It’s important to consult with compressor manufacturers or industry experts to determine the suitability of specific oil-free compressors for high-pressure applications. They can provide guidance on selecting the right compressor model, assessing system requirements, and ensuring compliance with safety standards.

By considering the design, pressure rating, operating efficiency, air treatment, and system safety, oil-free air compressors can successfully handle high-pressure applications in various industries, including manufacturing, automotive, aerospace, and energy.

air compressor

How Do You Troubleshoot Common Problems with Oil-Free Compressor Systems?

To troubleshoot common problems with oil-free compressor systems, follow these steps:

1. Check Power Supply:

Ensure that the compressor system is properly connected to a reliable power supply. Check for any tripped circuit breakers or blown fuses. Verify that the power switch is in the “on” position.

2. Inspect Air Filters:

Examine the air filters to see if they are dirty or clogged. Restricted airflow due to dirty filters can cause the compressor to overheat or operate inefficiently. Clean or replace the filters as necessary.

3. Check for Air Leaks:

Inspect the entire compressed air system for air leaks. Leaks can lead to reduced system pressure and inefficient operation. Use a leak detection solution or an ultrasonic leak detector to locate and repair any leaks in the system.

4. Monitor Pressure Gauges:

Observe the pressure gauges on the compressor system. If the pressure is consistently below the desired level, it could indicate a problem with the compressor’s output or a leak in the system. Ensure that the pressure relief valves are not open or malfunctioning.

5. Check for Excessive Heat:

Monitor the temperature of the compressor and associated components. If the system is running excessively hot, it may indicate a problem with cooling or lubrication. Ensure that the cooling fans are operating correctly and that the compressor is receiving proper lubrication, if applicable.

6. Inspect Drains and Condensate Management:

Check the drains and condensate management system for proper functioning. Accumulated condensate can cause issues such as water contamination or pressure drops. Ensure that drains are clear and functioning, and that the condensate management system is operating as intended.

7. Review Maintenance Records:

Refer to the maintenance records of the compressor system. Ensure that routine maintenance tasks, such as filter replacements, oil changes (if applicable), and component inspections, have been performed according to the manufacturer’s recommendations. Lack of proper maintenance can contribute to various issues in compressor systems.

8. Consult Manufacturer’s Documentation:

Refer to the manufacturer’s documentation, such as the user manual or troubleshooting guide, for specific guidance on diagnosing and resolving common problems with the oil-free compressor system. Manufacturers often provide detailed troubleshooting steps and recommendations tailored to their specific equipment.

9. Seek Professional Assistance:

If the troubleshooting steps do not resolve the issue or if you are uncertain about performing any maintenance or repairs, it is advisable to seek professional assistance. Contact the manufacturer’s customer support or consult a qualified technician with expertise in oil-free compressor systems.

Remember to prioritize safety when troubleshooting compressor systems. Follow proper lockout/tagout procedures and adhere to all safety guidelines provided by the manufacturer.air compressor

Are Oil-Free Air Compressors More Environmentally Friendly?

Oil-free air compressors are considered more environmentally friendly compared to oil-lubricated air compressors. These compressors offer several features and advantages that contribute to their eco-friendly nature. Here’s a detailed explanation of why oil-free air compressors are considered more environmentally friendly:

1. Elimination of Oil Contamination:

One of the significant environmental benefits of oil-free air compressors is the elimination of oil contamination in the compressed air system. Oil-lubricated compressors require oil for lubrication, which can potentially leak or contaminate the compressed air. Oil contamination can have adverse effects on downstream equipment, processes, and the environment. In contrast, oil-free air compressors operate without oil, ensuring clean, oil-free compressed air and eliminating the risk of oil contamination.

2. Reduction of Oil Spills and Leaks:

Oil-lubricated compressors have a higher risk of oil spills or leaks due to the presence of lubricating oil in the system. Oil spills can have severe environmental consequences, polluting soil, water bodies, and ecosystems. Oil-free air compressors eliminate the risk of oil spills or leaks, as there is no oil used in the compression process. This reduces the potential harm to the environment and minimizes the need for costly cleanup efforts.

3. Energy Efficiency:

Oil-free air compressors can be more energy-efficient compared to oil-lubricated compressors. The absence of oil in the compression chamber reduces internal friction and mechanical losses, resulting in improved energy efficiency. Energy-efficient compressors consume less electricity, leading to reduced energy consumption and lower greenhouse gas emissions. By using oil-free compressors, businesses can contribute to energy conservation and environmental sustainability.

4. Lower Environmental Footprint:

Due to the elimination of oil-related maintenance tasks, such as oil filtration, oil changes, and oil disposal, oil-free compressors have a lower environmental footprint. These maintenance activities associated with oil-lubricated compressors require the use of resources and generate waste, including used oil and oil filters. By using oil-free compressors, the consumption of resources and the generation of hazardous waste are reduced, contributing to a more sustainable and environmentally friendly operation.

5. No Oil Contamination in Air Tools and Products:

Oil contamination in compressed air can have detrimental effects on air tools, pneumatic equipment, and end products. Oil-free air compressors ensure that the compressed air delivered to these devices is clean and oil-free. This helps maintain the performance and longevity of air tools and prevents oil-related product defects. By using oil-free compressors, businesses can avoid costly repairs or replacements of equipment and minimize the risk of producing non-conforming or defective products.

It’s important to note that while oil-free air compressors offer environmental advantages, they may have certain limitations and considerations. These include the need for specialized maintenance, potential higher operating temperatures, and reduced maximum operating pressures compared to oil-lubricated compressors. Therefore, it’s essential to evaluate the specific requirements of the application and consider the trade-offs between environmental benefits and operational considerations when choosing an air compressor.

China Good quality 100W Silent Portable Oil Free Air Compressor for 1liter Oxygen Concentrator   air compressor oilChina Good quality 100W Silent Portable Oil Free Air Compressor for 1liter Oxygen Concentrator   air compressor oil
editor by CX 2023-10-25

Recent Posts