Product Description
Product Description
Our Advantages
ZIQI Oil Free Water Lubricant Screw Air Compressor Advantages:
1. 100% oil-free , good reliability
There is no oil in the water-lubricated screw body, which will not cause oil pollution of the compressed air. It belongs to a
completely oil-free screw air compressor. Dry-type oil-free machine bearings, gearboxes, and intercoolers require oil to
participate in lubrication and sealing. The high temperature of the unit can easily cause oil leakage to pollute the compressed air. It is a semi-oil-free compressor.
2. Isothermal compression, high efficiency, no flammable, explosive, etc.
The operating temperature of the oil-free screw machine does not exceed 50ºC, and the gas does not expand to save energy by more than 15%. The exhaust temperature of the semi-oil-free screw machine is above 180ºC. The high temperature makes the bearing, screw, body, and sealing material have a very short service life and must be expensive. s material. The volatilization of lubricating oil at high temperatures can cause fires and explosions.
3. Power saving: water-lubricated compressor is 1 of the lower energy consumption of oil-free machines in the world.
ZIQI air dry oil-free air compressor 90KW, nameplate capacity 12.50m?/min (10bar), water-jet all oil-free air compressor 90KW, the actual measured air volume is 14.52m?/min (10bar), the displacement has increased by 16%, This means that users save 16% of electricity. According to the calculation based on running 24 hours a day and the electricity cost of 1.0 yuan/kWh, each unit can save 1.26 million yuan in electricity costs for 10 years.
4. The compression temperature is relatively low, the host has a long life, the maintenance cost is relatively low, and the
trouble-free operation cycle is long.The main engine of the water-jet all-oil-free compressor has a general warranty of 5 years and a design life of more than 25 years. Low maintenance costs are a reliable choice for formal enterprises to focus on energy management and reduce product costs.
5. Simple maintenance and no worries
It is as simple as a “water pump” to ensure no worries.
6.Dry
The water content in compressed air is low. All compressors produce 100% saturated water vapor. The pressure dew point of water-injected and oil-free compressed air is less than 40 degrees Celsius. Actually, it contains less water, and a lot of water in the air will be discharged. .
| Motor | Air pressure | Air Flowing | Motor power | Dimension | Weight | ||||
| mpa | bar | psi | m3/min | cfm | hp | kw | L(mm)*W(mm)*H(mm) | kgs | |
| OF-11A | 0.7 | 7 | 102 | 1.6 | 56 | 15 | 11 | 1100mm*800mm*1000mm | 500 |
| 0.8 | 8 | 116 | 1.5 | 53 | |||||
| 1 | 10 | 145 | 1.3 | 46 | |||||
| OF-15A | 0.8 | 8 | 116 | 1.8 | 64 | 20 | 15 | 1130mm*900mm*1571mm | 550 |
| OF-18.5A | 0.7 | 7 | 102 | 3.1 | 109 | 25 | 18.5 | 1400mm*1000mm*1200mm | 600 |
| 0.8 | 8 | 116 | 2.8 | 99 | |||||
| 1 | 10 | 145 | 2.5 | 88 | |||||
| OF-22A | 0.7 | 7 | 102 | 3.7 | 131 | 30 | 22 | 1400mm*1000mm*1200mm | 655 |
| 0.8 | 8 | 116 | 3.4 | 120 | |||||
| 1 | 10 | 145 | 3 | 106 | |||||
| OF-30A | 0.7 | 7 | 102 | 5.2 | 184 | 41 | 30 | 1920mm*1170mm*1320mm | 1150 |
| 0.8 | 8 | 116 | 4.7 | 166 | |||||
| 1 | 10 | 145 | 4.3 | 152 | |||||
| OF-37A | 0.7 | 7 | 102 | 6.1 | 215 | 50 | 37 | 1920mm*1170mm*1320mm | 1200 |
| 0.8 | 8 | 116 | 5.6 | 198 | |||||
| 1 | 10 | 145 | 5 | 177 | |||||
| OF-45A | 0.7 | 7 | 102 | 7.5 | 265 | 61 | 45 | 1920mm*1170mm*1320mm | 1320 |
| 0.8 | 8 | 116 | 6.8 | 240 | |||||
| 1 | 10 | 145 | 6 | 212 | |||||
| OF-55A | 0.7 | 7 | 102 | 10 | 353 | 75 | 55 | 1930mm*1320mm*1535mm | 1520 |
| 0.8 | 8 | 116 | 9 | 318 | |||||
| 1 | 10 | 145 | 7.8 | 275 | |||||
| OF-75A | 0.7 | 7 | 102 | 13 | 459 | 102 | 75 | 1930mm*1320mm*1535mm | 1620 |
| 0.8 | 8 | 116 | 12 | 424 | |||||
| 1 | 10 | 145 | 10 | 353 | |||||
| OF-90A | 0.7 | 7 | 102 | 15.5 | 547 | 122 | 90 | 1930mm*1320mm*1535mm | 1800 |
| 0.8 | 8 | 116 | 14 | 494 | |||||
| 1 | 10 | 145 | 12.5 | 441 | |||||
| OF-110A | 0.7 | 7 | 102 | 20 | 706 | 150 | 110 | 2150mm*1600mm*1680mm | 3100 |
| 0.8 | 8 | 116 | 18 | 636 | |||||
| 1 | 10 | 145 | 16 | 565 | |||||
| OF-132A | 0.7 | 7 | 102 | 25 | 883 | 179 | 132 | 2150mm*1600mm*1680mm | 3250 |
| 0.8 | 8 | 116 | 23 | 812 | |||||
| 1 | 10 | 145 | 20 | 706 | |||||
| OF-160W | 0.7 | 7 | 102 | 27 | 953 | 217 | 160 | 2860mm*1500mm*1750mm | 4500 |
| 0.8 | 8 | 116 | 25.5 | 900 | |||||
| 1 | 10 | 145 | 24 | 847 | |||||
| OF-185W | 0.7 | 7 | 102 | 30 | 1059 | 251 | 185 | 2860mm*1500mm*1750mm | 4500 |
| 0.8 | 8 | 116 | 28 | 989 | |||||
| 1 | 10 | 145 | 25 | 883 | |||||
| OF-200W | 0.7 | 7 | 102 | 36 | 1271 | 272 | 200 | 2860mm*1500mm*1750mm | 4500 |
| 0.8 | 8 | 116 | 33 | 1165 | |||||
| 1 | 10 | 145 | 27 | 953 | |||||
*For more model,please contact the salesman person.
Packaging & Shipping
Company Profile
Certifications
FAQ
Are you manufacturer?
ZIQI: Yes,we are professional air compressor manufacturer over 10 years and our factory located in ZheJiang .
How long is your air compressor warranty?
ZIQI: For 1 year.
Do you provide After- sales service parts?
ZIQI: Of course, We could provide easy- consumable spares.
How long could your air compressor be used?
ZIQI: Generally, more than 10 years.
How about your price?
ZIQI: Based on high quality, Our price is very competitive in this market all over the world.
How about your customer service?
ZIQI: For email, we could reply our customers’ emails within 2 hours.
Do you support OEM?
ZIQI: YES, and we also provide multiple models to select.
How to get quicker quotation?
When you send us inquiry, please confirm below information at the same time:
* What is the air displacement (m3/min,cfm/min)?
* What is the air pressure (mpa,bar,psi)?
* What is the voltage in your factory (v/p/Hz)?
* It is ok if you need air tank, air dryer and filters.
This information is helpful for us to check suitable equipment solution and quotation quickly.
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Oil-free |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Customization: |
Available
|
|
|---|
.webp)
What Are the Downsides of Using Oil-Free Air Compressors?
While oil-free air compressors offer numerous advantages, there are also some downsides to consider. Understanding these drawbacks is important when evaluating the suitability of oil-free compressors for specific applications. Here’s a detailed explanation of the downsides of using oil-free air compressors:
1. Higher Initial Cost:
Oil-free air compressors generally have a higher initial cost compared to oil-lubricated compressors. The design and technology used in oil-free compressors, such as specialized coatings, precision manufacturing, and advanced filtration systems, contribute to their higher price tag. This can be a significant factor for budget-conscious buyers or for applications where cost is a primary consideration. However, it’s important to weigh the initial cost against the long-term benefits and potential cost savings in terms of maintenance, energy efficiency, and reduced risk of oil contamination.
2. Reduced Durability:
Oil-free compressors may have slightly reduced durability compared to oil-lubricated compressors. The absence of oil for lubrication can result in increased wear on certain components, such as piston rings, valves, and bearings. However, modern advancements in materials and engineering have significantly improved the durability and lifespan of oil-free compressors. With proper maintenance and adherence to recommended operating conditions, oil-free compressors can still provide reliable performance over an extended period.
3. Higher Energy Consumption:
Oil-free air compressors typically have higher energy consumption compared to oil-lubricated compressors. The absence of oil for lubrication increases friction within the compressor, requiring more energy to overcome this resistance. However, advancements in compressor design, such as improved air ends, energy-efficient motors, and variable speed drives, have helped minimize this energy consumption gap. Additionally, the potential energy savings from eliminating the need for oil changes and reducing the risk of pressure drops due to oil contamination can offset the higher energy consumption over the compressor’s lifetime.
4. Limited Cooling Capacity:
Oil-free compressors may have limited cooling capacity compared to oil-lubricated compressors. Oil acts as a lubricant and coolant in oil-lubricated compressors, effectively dissipating heat generated during compression. In contrast, oil-free compressors rely on other cooling mechanisms, such as air or water cooling, which may have limitations in handling high heat loads. This can be a consideration for applications that require continuous or high-duty cycle operation in elevated ambient temperatures. Adequate cooling systems and proper monitoring of temperature limits are necessary to prevent overheating and ensure optimal performance of oil-free compressors.
5. Noisy Operation:
Oil-free air compressors are generally noisier compared to oil-lubricated compressors. The absence of lubricating oil can result in increased noise levels due to direct metal-to-metal contact between rotating and reciprocating parts. However, advancements in noise reduction technologies and sound insulation materials have helped mitigate this issue to some extent. Additionally, the noise level can vary between different models and brands of oil-free compressors, so it’s important to consider the specific noise requirements of the application and select a compressor that meets those criteria.
Despite these downsides, oil-free air compressors have become increasingly popular and widely used in various industries due to their advantages in providing clean, oil-free compressed air. It’s important to assess the specific requirements of the application, consider the trade-offs, and consult with compressed air experts to determine whether an oil-free compressor is the most suitable choice.
.webp)
What Is the Impact of Oil-Free Technology on Compressed Air Quality?
The use of oil-free technology in compressed air systems has a significant impact on ensuring high-quality compressed air. Here’s a detailed explanation of the impact of oil-free technology on compressed air quality:
1. Elimination of Oil Contamination:
Oil-free technology ensures that the compressed air produced is free from oil contamination. Traditional compressors that use oil lubrication can introduce oil particles, aerosols, and vapors into the compressed air stream. These oil contaminants can have detrimental effects on downstream equipment, processes, and products. By eliminating oil from the compression process, oil-free technology helps maintain the purity and cleanliness of the compressed air, ensuring that it meets the required air quality standards.
2. Avoidance of Oil-Related Issues:
Oil contamination in compressed air systems can lead to various issues. Oil can cause damage to pneumatic equipment, valves, and seals, resulting in reduced efficiency and increased maintenance costs. It can also lead to product contamination in industries such as food and beverage, pharmaceuticals, and electronics manufacturing. Oil-free technology eliminates the risks associated with oil-related issues, ensuring that the compressed air remains clean, dry, and suitable for sensitive applications.
3. Enhanced Air Purity:
Oil-free compressors are designed with advanced filtration systems to further enhance air purity. These filtration systems typically include pre-filters, coalescing filters, and activated carbon filters. Pre-filters remove larger particles, coalescing filters capture smaller particles and coalesce water vapor, and activated carbon filters absorb odors and remaining oil vapors. By incorporating such filtration stages, oil-free technology ensures that the compressed air is free from particulate matter, moisture, odors, and residual oil content, resulting in higher air purity levels.
4. Compliance with Air Quality Standards:
Oil-free technology helps compressed air systems comply with air quality standards and regulations. Standards such as ISO 8573 specify acceptable limits for contaminants in compressed air, including oil content, particulate matter, and moisture. Oil-free compressors, with their ability to produce clean and oil-free compressed air, facilitate compliance with these standards. This is particularly crucial in industries where air quality is critical, such as healthcare, pharmaceuticals, electronics, and food processing.
5. Protection of Sensitive Applications:
Many applications require clean and uncontaminated compressed air to ensure optimal performance and product integrity. Oil-free technology provides the necessary assurance of air quality for these sensitive applications. Industries such as medical devices, laboratory testing, spray painting, and semiconductor manufacturing rely on oil-free compressed air to prevent contamination, maintain precise operation, and achieve consistent results. The use of oil-free technology safeguards the reliability and integrity of these applications.
6. Reduced Maintenance and Downtime:
Oil-free compressors generally require less maintenance compared to oil-lubricated compressors. The absence of oil eliminates the need for oil changes, oil filters, and associated maintenance tasks. This results in reduced maintenance costs, less downtime, and increased productivity. Additionally, the risk of oil-related failures and breakdowns is minimized, leading to improved overall system reliability and uptime.
In summary, oil-free technology has a significant positive impact on compressed air quality. It eliminates oil contamination, avoids oil-related issues, enhances air purity, facilitates compliance with air quality standards, protects sensitive applications, and reduces maintenance and downtime. These benefits make oil-free technology a preferred choice in industries where clean and high-quality compressed air is essential.
.webp)
Can Oil-Free Compressors Be Used in Medical Applications?
Yes, oil-free compressors can be used in medical applications and are widely utilized in various healthcare settings. These compressors provide clean, oil-free compressed air, making them suitable for critical medical processes and equipment. Here’s a detailed explanation of the use of oil-free compressors in medical applications:
1. Surgical Tools and Instrumentation:
Oil-free air compressors are commonly used in surgical suites and operating rooms to power pneumatic surgical tools and instrumentation. Surgical tools, such as pneumatic drills, saws, and shavers, rely on compressed air for their operation. Using oil-free compressors ensures that the compressed air delivered to these tools is free from oil contamination, reducing the risk of oil particles entering the surgical site or interfering with the sterile environment.
2. Respiratory Devices:
In respiratory care, oil-free compressors play a vital role in powering various medical devices, such as ventilators, nebulizers, and continuous positive airway pressure (CPAP) machines. These devices require a clean and reliable source of compressed air to deliver oxygen or medication to patients. Oil-free compressors ensure that the compressed air produced is free from oil, providing safe and effective respiratory support.
3. Dental Equipment:
Oil-free compressors are extensively used in dental offices and clinics to power dental tools and equipment, including dental drills, air syringes, and suction devices. Dental procedures require a high level of precision, and any contamination in the compressed air can compromise patient safety and treatment outcomes. By using oil-free compressors, dental professionals can ensure the delivery of clean, oil-free compressed air for optimal dental care.
4. Laboratory Applications:
Oil-free compressors are employed in various laboratory applications within the medical field. These applications include air supply for analytical instruments, sample preparation, cell culture, and other research processes. Oil-free compressed air is essential in maintaining the integrity of samples, preventing contamination, and ensuring accurate and reliable test results.
5. Pharmaceutical Manufacturing:
In pharmaceutical manufacturing, oil-free compressors are utilized to provide clean compressed air for critical processes. This includes applications such as product drying, powder handling, and packaging. Oil-free compressed air ensures the purity and quality of pharmaceutical products, meeting stringent regulatory requirements and minimizing the risk of contamination.
6. Medical Gas Systems:
Oil-free compressors are an integral part of medical gas systems, which provide essential gases like oxygen, nitrogen, and compressed air throughout healthcare facilities. These gases are used for various medical purposes, such as patient breathing, anesthesia, laboratory testing, and respiratory therapy. Oil-free compressors ensure the delivery of clean and uncontaminated medical gases, maintaining patient safety and the reliability of medical gas systems.
Oil-free compressors offer the necessary features and performance required for critical medical applications. They provide clean, oil-free compressed air, ensuring patient safety, maintaining sterility, and meeting regulatory standards. However, it’s important to select oil-free compressors specifically designed and certified for medical applications and adhere to manufacturer guidelines and maintenance protocols to ensure optimal performance and patient care.
editor by CX 2023-09-28