China wholesaler CHINAMFG Brand Oil Free Air Compressor air compressor CHINAMFG freight

Product Description

Very good quality for your choice ! more details ,please contact us 
Oil free / oil less dental Air compressor is mainly dental room, medical room etc
Features
1. Both 100 % copper and aluminium coil wire are available.
2. Compact, light, east to carry. Suit for mobile,
3. Oil free oilless silent series, get 100% purity pressed air
technical data as follows:
 

Model Air delivery Working pressure Speed Noise Power Outlet tank/L dimension 
  (Nm3/min) (Mpa) (r.p.m) (dB) (kw) (inch)   (L*W*H)CM
ZW-0.1/7 0.1 0.7  980 ≤78 1.5(220v) G1/4″ 40 75*35*75
ZW-0.24/7 0.24 0.7  950 ≤81 2.2(380v) G1/2″ 80 114*40*90
ZW-0.3/7 0.3 0.7  950 ≤81 2.2(380v) G1/2″ 80 114*40*90
VW-0.45/7 0.45 0.7  920 ≤83 4(380v) G1/2″ 120 130*46*96
VW-0.6/7 0.6 0.7  950 ≤84 5.5(380v) G1/2″ 120 130*46*96
VW-0.42/10 0.42 1.0  920 ≤84 4(380v) G1/2″ 120 130*46*96
VW-0.5/14 0.5 1.4  670 ≤84 5.5(380v) G1/2″ 180 145*50*110
WW-0.6/10 0.6 1.0  740 ≤84 5.5(380v) G1/2″ 180 145*50*110
WW-0.9/7 0.9 0.7  810 ≤84 7.5(380v) G1/2″ 180 145*50*110
WW-0.9/10 0.9 1.0  810 ≤84 7.5(380v) G1/2″ 180 145*50*110
WW-0.7/12.5 0.7 1.3  740 ≤84 7.5(380v) G1/2″ 180 145*50*110
WW-1.25/7 1..25 0.7  860 ≤85 11(380v) G3/4″ 280 160*65*120
WW-1.25/10 1.25 1.0  770 ≤85 11(380v) G3/4″ 280 160*65*120
WW-1.6/10 1.6 1.0  820 ≤85 15(380v) G3/4″ 320 166*65*122
WW-1.8/10  1.8 1.0  900 ≤86 15(380v) G3/4″ 320 166*65*122
WW-1.2/10 1.2 1.0  740 ≤84 5.5*2(380v) G1″ 300 185*125*140
WW-1.8/7 1.8 0.7  810 ≤84 7.5*2(380v) G1″ 300 185*125*140
WW-1.8/10 1.8 1.0  810 ≤84 7.5*2(380v) G1″ 300 185*125*140
WW-1.4/12.5 1.4 1.3  740 ≤84 7.5*2(380v) G1″ 300 185*125*140
WW-2.5/7 2.5 0.7  860 ≤86 11*2(380v) G1″ 300 185*125*140
WW-2.5/10 2.5 1.0  770 ≤86 11*2(380v) G1″ 300 185*125*140
WW-3.0/7 3 0.7  770 ≤86 11*2(380v) G1″ 320 185*125*140
WW-3.0/10 3 1.0  810 ≤86 11*2(380v) G1″ 320 185*125*140
WW-3.2/7 3.2 0.7  820 ≤86 15*2(380v) G1″ 320 190*150*150
WW-3.2/10 3.2 1.0  820 ≤86 15*2(380v) G1″ 320 190*150*150
WW.3.6/7 3.6 0.7  900 ≤86 15*2(380v) G1″ 320 190*150*150
WW-3.6/10 3.6 1.0  900 ≤86 15*2(380v) G1″ 320 190*150*150
WW.4.8/10 4.8 1.0  900 ≤86 15*2(380v) 11*1(380v) G11/2″ / 221*136*105
WW-5.4/10 5.4 1.0  900 ≤86 15kw*3 G11/2″ / 221*136*100
SW-6.5/8 6.5 0.8  640 ≤86 55kw DN50FL / 180*130*160

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

HS: 8414809090
Packing Material: Plywood
Voltage: 380V 50Hz;460V 60Hz;220 60Hz
Type: Piston
Performance: Low Noise
Drive Mode: Electric
Customization:
Available

|

air compressor

What Are the Downsides of Using Oil-Free Air Compressors?

While oil-free air compressors offer numerous advantages, there are also some downsides to consider. Understanding these drawbacks is important when evaluating the suitability of oil-free compressors for specific applications. Here’s a detailed explanation of the downsides of using oil-free air compressors:

1. Higher Initial Cost:

Oil-free air compressors generally have a higher initial cost compared to oil-lubricated compressors. The design and technology used in oil-free compressors, such as specialized coatings, precision manufacturing, and advanced filtration systems, contribute to their higher price tag. This can be a significant factor for budget-conscious buyers or for applications where cost is a primary consideration. However, it’s important to weigh the initial cost against the long-term benefits and potential cost savings in terms of maintenance, energy efficiency, and reduced risk of oil contamination.

2. Reduced Durability:

Oil-free compressors may have slightly reduced durability compared to oil-lubricated compressors. The absence of oil for lubrication can result in increased wear on certain components, such as piston rings, valves, and bearings. However, modern advancements in materials and engineering have significantly improved the durability and lifespan of oil-free compressors. With proper maintenance and adherence to recommended operating conditions, oil-free compressors can still provide reliable performance over an extended period.

3. Higher Energy Consumption:

Oil-free air compressors typically have higher energy consumption compared to oil-lubricated compressors. The absence of oil for lubrication increases friction within the compressor, requiring more energy to overcome this resistance. However, advancements in compressor design, such as improved air ends, energy-efficient motors, and variable speed drives, have helped minimize this energy consumption gap. Additionally, the potential energy savings from eliminating the need for oil changes and reducing the risk of pressure drops due to oil contamination can offset the higher energy consumption over the compressor’s lifetime.

4. Limited Cooling Capacity:

Oil-free compressors may have limited cooling capacity compared to oil-lubricated compressors. Oil acts as a lubricant and coolant in oil-lubricated compressors, effectively dissipating heat generated during compression. In contrast, oil-free compressors rely on other cooling mechanisms, such as air or water cooling, which may have limitations in handling high heat loads. This can be a consideration for applications that require continuous or high-duty cycle operation in elevated ambient temperatures. Adequate cooling systems and proper monitoring of temperature limits are necessary to prevent overheating and ensure optimal performance of oil-free compressors.

5. Noisy Operation:

Oil-free air compressors are generally noisier compared to oil-lubricated compressors. The absence of lubricating oil can result in increased noise levels due to direct metal-to-metal contact between rotating and reciprocating parts. However, advancements in noise reduction technologies and sound insulation materials have helped mitigate this issue to some extent. Additionally, the noise level can vary between different models and brands of oil-free compressors, so it’s important to consider the specific noise requirements of the application and select a compressor that meets those criteria.

Despite these downsides, oil-free air compressors have become increasingly popular and widely used in various industries due to their advantages in providing clean, oil-free compressed air. It’s important to assess the specific requirements of the application, consider the trade-offs, and consult with compressed air experts to determine whether an oil-free compressor is the most suitable choice.

air compressor

How Do You Troubleshoot Common Problems with Oil-Free Compressor Systems?

To troubleshoot common problems with oil-free compressor systems, follow these steps:

1. Check Power Supply:

Ensure that the compressor system is properly connected to a reliable power supply. Check for any tripped circuit breakers or blown fuses. Verify that the power switch is in the “on” position.

2. Inspect Air Filters:

Examine the air filters to see if they are dirty or clogged. Restricted airflow due to dirty filters can cause the compressor to overheat or operate inefficiently. Clean or replace the filters as necessary.

3. Check for Air Leaks:

Inspect the entire compressed air system for air leaks. Leaks can lead to reduced system pressure and inefficient operation. Use a leak detection solution or an ultrasonic leak detector to locate and repair any leaks in the system.

4. Monitor Pressure Gauges:

Observe the pressure gauges on the compressor system. If the pressure is consistently below the desired level, it could indicate a problem with the compressor’s output or a leak in the system. Ensure that the pressure relief valves are not open or malfunctioning.

5. Check for Excessive Heat:

Monitor the temperature of the compressor and associated components. If the system is running excessively hot, it may indicate a problem with cooling or lubrication. Ensure that the cooling fans are operating correctly and that the compressor is receiving proper lubrication, if applicable.

6. Inspect Drains and Condensate Management:

Check the drains and condensate management system for proper functioning. Accumulated condensate can cause issues such as water contamination or pressure drops. Ensure that drains are clear and functioning, and that the condensate management system is operating as intended.

7. Review Maintenance Records:

Refer to the maintenance records of the compressor system. Ensure that routine maintenance tasks, such as filter replacements, oil changes (if applicable), and component inspections, have been performed according to the manufacturer’s recommendations. Lack of proper maintenance can contribute to various issues in compressor systems.

8. Consult Manufacturer’s Documentation:

Refer to the manufacturer’s documentation, such as the user manual or troubleshooting guide, for specific guidance on diagnosing and resolving common problems with the oil-free compressor system. Manufacturers often provide detailed troubleshooting steps and recommendations tailored to their specific equipment.

9. Seek Professional Assistance:

If the troubleshooting steps do not resolve the issue or if you are uncertain about performing any maintenance or repairs, it is advisable to seek professional assistance. Contact the manufacturer’s customer support or consult a qualified technician with expertise in oil-free compressor systems.

Remember to prioritize safety when troubleshooting compressor systems. Follow proper lockout/tagout procedures and adhere to all safety guidelines provided by the manufacturer.air compressor

Are Oil-Free Air Compressors Suitable for Food and Beverage Industries?

Yes, oil-free air compressors are highly suitable for the food and beverage industries and are widely used in various applications within these sectors. The clean and oil-free compressed air produced by these compressors is essential to maintain product quality, ensure food safety, and meet industry regulations. Here’s a detailed explanation of why oil-free air compressors are suitable for the food and beverage industries:

1. Preventing Contamination:

The primary advantage of oil-free air compressors in the food and beverage industries is the prevention of oil contamination. These industries have stringent hygiene and safety standards, and any contamination in the production process can compromise product quality and consumer health. Oil-free compressors eliminate the risk of oil particles entering the compressed air stream, ensuring that the compressed air used in various processes, such as packaging, filling, and bottling, is free from oil contamination.

2. Preserving Food Freshness:

Oil-free air compressors help maintain the freshness and quality of food products. In applications such as food packaging, where compressed air is used to create a protective atmosphere or seal packaging, the absence of oil eliminates the risk of oil residues affecting the taste, aroma, or shelf life of the packaged food. Oil-free compressors ensure that the compressed air used for these purposes is clean and does not introduce any unwanted flavors or odors.

3. Compliance with Food Safety Standards:

The food and beverage industries are subject to strict regulations and standards to ensure food safety. Oil-free air compressors help companies meet these requirements by providing clean, oil-free compressed air that adheres to food safety guidelines. Compressed air used in processes like air agitation, product drying, or pneumatic conveyance must be free from contaminants to prevent cross-contamination and maintain hygienic conditions throughout the production chain.

4. Minimizing Product Loss and Waste:

In the food and beverage industries, any product loss or waste can have significant financial and environmental implications. Oil contamination in compressed air can lead to product spoilage, resulting in costly product losses and waste. By using oil-free air compressors, the risk of product contamination is minimized, helping to reduce waste and improve overall production efficiency.

5. Ensuring Equipment Performance and Longevity:

Oil-free air compressors help protect sensitive food and beverage production equipment from oil-related issues. Oil contamination can damage pneumatic valves, seals, and other components, leading to equipment malfunction, unplanned downtime, and costly repairs. Oil-free compressors eliminate these risks, ensuring the longevity and reliable performance of the production equipment.

6. Meeting Industry-Specific Requirements:

The food and beverage industries have specific requirements for compressed air quality and purity. Oil-free air compressors are designed to meet these industry-specific requirements, often complying with standards such as ISO 8573-1 Class 0, which certifies the air as completely oil-free. This certification provides assurance that the compressed air meets the strictest quality standards and is suitable for critical applications in these industries.

By using oil-free air compressors, companies in the food and beverage industries can maintain the highest standards of product quality, hygiene, and safety. It is essential to select oil-free compressors specifically designed for these industries and follow proper maintenance protocols to ensure consistent performance and compliance with industry regulations.

China wholesaler CHINAMFG Brand Oil Free Air Compressor   air compressor CHINAMFG freightChina wholesaler CHINAMFG Brand Oil Free Air Compressor   air compressor CHINAMFG freight
editor by CX 2024-05-02

Recent Posts